Faculty Achievements

Faculty NPTL Achievements of Mr. V. SRINIVASA RAO, Mr. MOHD RAFEEQ UR RAHMAN and Mr. NARENDRA.

National Education Award: Dr.  P. Divakara Rao has received “Best Professor of Mechanical Engineering Studies"  by DEWANG MEHTA  National Education Award (Regional)  on 15/11/19 at Taj Banjara, Hyderabad.

First prize: Ms. J.Sumathi has participated in Group Discussion on independence day and got first prize, on 13/8/19.

Institute Innovation Council: Dr. P.  Divakara Rao has been nominated as a member of the Institute Innovation Council MHRD Govt. of India for the academic year 2018-19.

Book chapter publication: Dr. P. Divakara Rao has published a book chapter in  Springer book series on “Advances in Intelligent Systems and Computing” 2019.

Elsevier journal Reviewer: Dr .P. Divakara Rao is a selected as Reviewer for the journal Elsevier (HELIYON).

SWAYAM-NPTEL Registration/Certifications: Staff/students of the department who have successfully passed in various online courses offered by Swayam-NPTEL during the current month are as follows:-

S.No

Name of the candidate

Enrolled Subject

Date of the Exam

Statues of the result

Medal, if any

1

Dr.P.Divakara Rao

Manufacturing of composites

17/11/19

cleared

Elite & Silver

2

Dr.P.Divakara Rao

Computer numerical control CNC of machine tools and processes

17/11/19

cleared

Satisfactory

3

Shahin Shaikh

Fundamentals of manufacturing processes

17/11/19

cleared

Satisfactory

4

Ms.J.Sumathi

Concept of thermodynamics

17/11/19

cleared

Elite & Silver

Dr. P. Divakara Rao Awarded Ph.D. in Mechanical Engineering on 30th Nov 2019 from JNTUH, Hyderabad.

Dr. P.Divakara Rao has been a Reviewer for Heliyon Journal,  Elsevier

 Mr. MOHD RAFEEQ UR RAHMAN has got Ph.D. admission in KL University

 Mrs.P. SEEMA RANI has got a Ph.D. admission at KL University.

PUBLICATIONS BY FACULTY MEMBERS


S.No.

Name of the Staff Member

Number of Papers Published

Journal

Conference

Total

National

Int.Nat

National

Int.Nat.

1.

  Dr. A.C.S  Kumar

08

32

29

05

74

2.

  Dr. P. Divakar Rao

--

22

6

19

47

3.

  Mr. Y.Vijaya Kumar

01

07

--

--

08

4.

 Dr.Md. IsrarEqubal

 --

20

03

25

48

5.

 Dr. R.S. Umamaheshwar Rao

01

06

--

--

07

6.

  Dr. C.Udaya Kiran

--

11

08

06

25

7.

  Dr. P.Indreshwaraiah

--

3

--

--

03

8.

  Mr. Sridhara Reddy

--

07

09

01

17

9.

  Mr.G.Gopala Krishna

--

05

03

06

14

10.

  Mr.S.Anoop Kumar

01

07

01

08

17

11.

  Mr.Y.Vijaya Kumar

01

07

--

--

08

12.

  Mr.B.V.K.Murthy

--

--

--

01

01

13.

  P. Seema Rani

--

04

--

--

04

14.

 T.E. Niharika

--

04

--

--

04

15.

 G.Gopinath

--

04

--

--

04

 

                             PAPERS  PUBLISHED BY MECHANICAL FACULTY

  1. Dara Eshwar and Dr.A.C.S.Kumar: Taguchi Based Mechanical Property Optimization of Heat Treated Samples of AL – 65032 Alloy Using TIG Welding, International Journal of Materials Science (ISSN :  0973-4589), Vol. 10, No. 1 (2015), pp. 17 – 29.
  2. Dara Eshwar, Dr.A.C.S.Kumar and Dr.B.Koti Veera Chari : AL – 65032 Mechanical Property Optimization and Analysis of Heat Treated Samples Based on Taguchi Metal Inert Gas (MIG) Welding, International Journal of Scientific Engineering and Technology Research (ISSN : 2319 – 8885), Vol. 4, Issue No. 9, April, 2015, pp. 1630 – 1635.
  3.   A.C.S. Kumar, A.K. Mehta, S.P. Dubey and U.R.K. Rao : Modelling of Grinding Wheel  Life by the Group Method of Data Handling Technique together with Sensitivity Analysis, International Journal of WEAR, V 127, 1988, p. 179-191.
  4. V. Vasu, K.Rama Krishna, and A.C.S.Kumar: Exploitation of Thermal Properties of Fluids  Embedded with Nanostructured Materials, International Energy Journal, Vol.8, 2007,  p.181-190.
  5.  V. Vasu, K.Rama Krishna, and A.C.S.Kumar: Analytical Prediction of Thermophysical  Properties of Fluids embedded with Nanostructured Materials, Int. Journal of  Nanoparticles, Vol.1, No.1, 2008, p. 32-48.
  6. P. Divakara Rao, “Effect of fiber loading and void content on Tensile properties of keratin based randomly oriented human hair fiber composites”  International Journal of Composite Materials, vol –ME 47 pp37-47,DEC-2017
  7. P. Divakara Rao, Effect of fiber loading and void content on Tensile properties of keratin based randomly oriented human hair fiber composites”  International Journal of Composite Materials , vol 7,issue 5, pp136-134,Sep-2017
  8. P. Divakara Rao ,“Impact of Socio-Economic Factors on Women Entrepreneurship In India: An Empirical Study” International Journal of Business and Administration Research Review July - Sep, 2015. Page 154-160,vol-2 issue 11,Sep-2015
  9. P. Divakara Rao “Reducing Machining Time by Using Modern Manufacturing Software” International Journal of Engineering Development and Research, vol-2,issue 4,pp 3619-3626, Dec-2014.
  10. R.S.Umamaheshwar Rao, Dr. G.C.M.Reddy, Development and Thermal Characterization of Chitin Particle Reinforced Phenol Formaldehyde Composite. Institute of Engineers journal, vol. 92, 2011,pp 8-11, ISSN: 2250-248.
  11. R.S.Umamaheshwar Rao , Dr. G.Chandra Mohan Reddy, Thermal Characterization of Crab Shell Chitin Whisker Reinforced Phenol Formaldehyde Nanocomposites. International Journal of Emerging Technology and Advanced Engineering. Vol 4(1), January 2014, pp 407-412, ISSN 2250–2459
  12. R.S.Umamaheshwar Rao , Dr. G.Chandra Mohan Reddy, Synthesis of Chitin nano Particles for Preparation of nano PF Composites, IOSR journal of Polymer and Textile Engineering (IOSR-JPTE), Vol 1(2), January 2014, pp 11-14, e-ISSN:2348-019X, p-ISSN: 2348-0181
  13. R.S.Umamaheshwar Rao , Dr. G.Chandra Mohan Reddy, Sorption Characterization of Crab Shall Chitin Whisker Reinforced phenol Formaldehyde Nanocomposites, International Journal of Research and Engineering, Vol 3(6), June 2016, pp 38-40, ISSN: 2348-7860
  14. R.S.Umamaheshwar Rao, Dr. G.Chandra Mohan Reddy, Mechanical Properties of Chitin WhiskerLoaded Water Soluble Phenol Formaldehyde nano Composites, International Journal of Mechatronics and Manufacturing Technology(MANTECH Publications), Vol 1(1), 2016, pp 14-21
  15. P. Sridhar, Dr. R.S Umamaheshwar Rao, Mr. Y Vijaya Kumar, Design Improvement in front Bumper of a Passenger Car using Impact Analysis, International Journal of Engineering Technology Science and Research, IJETSRISSN 2394 – 3386, Volume 4, Issue 12, December 2017
  16. Md. Rafeeq ur Rahman “Fabrication and FE Analysis of Hemispherical Closed Ends Composite Cylinder”, International Journal of Emerging Technology and Advanced Engineering (IJETAE), ISSN 2250-2459, Volume 6, Issue 10, October 2016
  17. K. Srinivas, G. Gopala krishna ‘prediction models for wedm through response surface methodology(rsm) journal of manufacturing engineering, September , 2017,vol.12,issue.3,pp 160-165
  18. P.  Seema Rani ,” static and analysis of micro drills using” , vol-6,issue-1.
  19. P. Seema Rani “ analysis of cabin mounting bracket of truck using ANSYS, vol-5,issue-11.
  20. P. Seema Rani, “Fabrication and FE analysis of  hemispherical  closed ends of composite cylinder”r,vol-5,issue-10
  21. “Gender Effects on Risk Propensity, Risk perceptions and Risk Taking Behaviour of Entrepreneurs- An Exploratory Analysis”,International Conference on Emerging trends in Engineering, Science and management, march 2017, 1416-1424, SBN :978-93-86171-32-0.
  22. Gender Effects on Risk Propensity, Risk perceptions and Risk Taking Behaviour of Entrepreneurs- An Exploratory Analysis, International Journal of Science Technology and management, 2017, Volume 06, Issue 03, 508-516, ISSN: 2394-1529.
  23. A Study on Entrepreneurial Inclination among students, International Journal of Emerging Research in Management and Technology, 2017, Volume 06, Issue 08, 357-362, ISSN :2278-9359.
  24. “Effect of fiber loading and void content on Tensile properties of keratin based randomly oriented human hair fiber composites”, International Journal of Composite Materials, 2017, 7(5), 136-134, e-ISSN: 2166-4919 2017;  doi:10.5923/j.cmaterials.20170705.02
  25. finite element analysis of a gas turbine rotor blade, International Journal of Advanced Engineering Research and Studies, March2016, Volume No.03, Issue No.24, 484, E-ISSN2249–8974
  26. “Tensile properties of human hair reinforced polyester composites”, International conference on advances in materials and manufacturing (ICAMM-2016), December2016, 541-546, e-ISBN: 978-93-86256-19-5
  27. Mechanical characterization of human hair fibre reinforced polyester composite- a comparative analysis, International conference on Emerging Trends in Mechanical Engineering during 23-24 September 2016 (ICETIME 2016) , September, 92-95, ISBN: 9788131427941.
  28. Impact of Socio-Economic Factors on Women Entrepreneurship In India: An Empirical Study, International Journal of Business and Administration Research Review July - Sep, 2015. Page 154-160., September 2015, Volume No.2, Issue 11,154-160, ISSN NO. 2348-0653),
  29. Md IsrarEqubal, RajkumarOhdar, PinakiTalukdar, DebasisMukerjee “Hot forging behavior of medium carbon and microalloyed steel: A comparative study” International Journal of Microstructure and Materials Properties, Vol. 12, No. 1/2, pp. 1-11, 2017.
  30. AzharEqubal, Md. IsrarEqubal, Anoop Kumar Sood, Md. Asif Equbal “A comparative study on electroplating of FDM parts” International Journal of Technology, Vol. 8, No. 5, pp. 328- 336, 2017.
  31. AzharEqubal, Anoop Kumar Sood, M. Asif Equbal, M. IsrarEqubal “An Investigation on material removal rate of EDM process: A response surface methodology approach” International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, Vol. 11, No. 4, pp. 845-850, 2017.
  32. ParwezAlam, Md IsrarEqubal, Avtar Krishna “Die Stress Optimization using Quantum Behaved Particle Swarm Optimization” International Journal of Mechanical and Production Engineering Research and Development, Vol. 7, No. 1, pp. 95-104, 2017.
  33. Md IsrarEqubal, ParwezAlam, RajkumarOhdar, Md SerfrazAlam “Studies on Lubrication Behavior of 35C8 Steel Using Ring Compression Test and Finite Element Simulation” International Journal of Mechanical And Production Engineering, Vol. 4, No. 11, pp. 4-8, 2016.
  34. Md IsrarEqubal, ParwezAlam, RajkumarOhdar, Kumar AniketAnand, Md. SerfrajAlam “Effect of Cooling Rate on the Microstructure and Mechanical Properties of Medium Carbon Steel” International Journal of Metallurgical Engineering, Vol. 5, No. 2, pp. 21-24, 2016.
  35. Md IsrarEqubal, RajkumarOhdar, AzharEqubal, Anoop Kumar Sood “Grey based Taguchi method for optimization of hot forging of connecting rod” International Journal of Manufacturing Research, Vol. 11, No. 1, pp. 89-109, 2016.
  36. PinakiTalukdar, RajKumarOhdar, Balbir Singh, Md IsrarEqubal “Optimization of process parameters in hot forging of medium carbon micro-alloyed steel” Applied Mechanics and Materials, Vols. 813-814, pp. 563-568, 2015.
  37. AzharEqubal, Md. IsrarEqubal, RajkumarOhdar “Isothermal Forging of Ti-6Al-4V Alloy - Flow Stress Evaluation and Optimization” International Journal of Scientific Research in Science, Engineering and Technology, Vol. 1, No. 5, pp. 235-238, 2015.
  38. RajkumarOhdar, PinakiTalukdar, Md. IsrarEqubal “Evaluation of friction coefficient of 38MnVS6 medium carbon micro-alloyed steel in hot forging process by using ring compression test” Technology Letters, Vol. 2, No. 3, pp. 12-16, 2015.
  39. Md IsrarEqubal, RajkumarOhdar, Balbir Singh and PinakiTalukdar “Forgeability Study of Medium Carbon Micro-Alloyed Forging Steel” International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering Vol. 9, No. 3, pp. 391-395, 2015.
Scroll To Top